玫瑰花及Gcode 3D打印模型STL格式

模型清单如下
玫瑰花及Gcode 3D打印模型STL格式
;Generated with Cura_SteamEngine 13.06.4
M109 T0 S200.000000
T0
;Sliced at: Mon 24 Nov 2014 13:34:33
;Basic settings: Layer height: 0.15 Walls: 1.2 Fill: 8
;Print time: #P_TIME#
;Filament used: #F_AMNT#m #F_WGHT#g
;Filament cost: #F_COST#
G21        ;metric values
G90        ;absolute positioning
M107       ;start with the fan off
G28 X0 Y0  ;move X/Y to min endstops
G28 Z0     ;move Z to min endstops
G1 Z15.0 F6000 ;move the platform down 15mm
G92 E0                  ;zero the extruded length
G1 F200 E3              ;extrude 3mm of feed stock
G92 E0                  ;zero the extruded length again
G1 F6000
M117 Printing...

;total_layers=346
;LAYER:0
M107
G0 F3720 X84.05 Y81.00 Z0.30
;TYPE:SKIRT
G1 F1440 X85.10 Y79.93 E0.02573
STL format of rose and gcode 3D printing model

Szh3d模型下载网
Szh3d模型下载网
Szh3d模型下载网

模型清单如下
;Generated with Cura_SteamEngine 13.06.4
M109 T0 S200.000000
T0
;Sliced at: Mon 24 Nov 2014 13:34:33
;Basic settings: Layer height: 0.15 Walls: 1.2 Fill: 8
;Print time: #P_TIME#
;Filament used: #F_AMNT#m #F_WGHT#g
;Filament cost: #F_COST#
G21        ;metric values
G90        ;absolute positioning
M107       ;start with the fan off
G28 X0 Y0  ;move X/Y to min endstops
G28 Z0     ;move Z to min endstops
G1 Z15.0 F6000 ;move the platform down 15mm
G92 E0                  ;zero the extruded length
G1 F200 E3              ;extrude 3mm of feed stock
G92 E0                  ;zero the extruded length again
G1 F6000
M117 Printing...

;total_layers=346
;LAYER:0
M107
G0 F3720 X84.05 Y81.00 Z0.30
;TYPE:SKIRT
G1 F1440 X85.10 Y79.93 E0.02573
STL format of rose and gcode 3D printing model